background image

Document NO.: 

GS

559A-39-001 

Version: F 

- 1 -

EN14604:2005/AC:2008 

Smoke Alarm User Manual 

Model number: 

GS

559A

Thank you for purchasing our smoke alarm

 

with wireless and 

heat detection. Please take a few minutes to read  the user’s 
manual thoroughly and familiarize yourself and your family 
with its operation. And save it for future reference.     

Product Specifications: 

Power 

: DC2*1.5V Alkaline AA battery 

(Gold Peak Group: GP 15A LR6 or Energizer: E91 or 
  Raymax: LR6 ) 

Operation current 

6uA (Standby) 

     

75mA (Alarm) 

Alarm volume 

: >85dB(A) at 3 meters. 

Smoke sensitivity 

: 0.115-0.168dB/m 

Heat sensitivity: 

54-70

 

Local smoke alarm pattern:   

BI 0.5s - pause 0.5s – BI 0.5s – pause 0.5s – BI 0.5s – 
pause 1.5s- BI 0.5s - pause 0.5s – BI 0.5s – pause 0.5s 
– BI  0.5s  –  pause  4.5s,  with  the  red  LED  flashing
every 1 second, repeat this alarm pattern. 

Local heat alarm pattern:   

BI 0.2s - pause0.1s- BI 0.2s - pause 0.1s, with the red 
LED flashing every 1.0s, keep this alarm pattern for 
8.5 seconds, then pause 4.5s,repeat this alarm pattern. 

Wireless alarm pattern: 

Bi 0.2s - pause 0.1s - Bi 0.2s - pause 1.2s, with the 

       

red LED flashing every 1.0 second, repeat this alarm 
pattern. 

Description: 

This  unit  is  a  photoelectric  3V  DC  smoke  alarm.  It  is 
operated by 3v AA  Alkaline battery. With the photoelectric 
technology, it is more sensitive in detecting slow smoldering   
fires which generate light smoke, little heat and may smolder 
for hours before bursting into flames. This smoke alarm does   
not contain any radioactive material. Smoke alarms should be 
installed  in  every room  (except  the  bathroom  and  kitchen), 
finished attics and basements, making sure the people in the 
home  will be  able  to  hear and respond to  the alarm  sound. 
For  minimum  protection,  you  should  install  an  alarm  on 
every level of the home particularly outside sleeping rooms. 
Each alarm should be placed in the middle of the ceiling of 
each  room  to  be  protected.  Typical  single  storey  dwelling 
installation  recommendations:  Install  a  smoke  alarm  on  the 
ceiling inside each bedroom and in the hallway outside each 
separate  sleeping  area.  If  a  bedroom  area  hallway  is  more 
than 30 feet long, install a smoke alarm at each end. If there 
is a basement: install a smoke alarm on the basement ceiling 
at the bottom of the stairwell. Typical multi-storey dwelling 
installation  recommendations:  Install  a  minimum  of  one 
smoke alarm on each occupiable level of the home. Install a 
smoke alarm on the ceiling or wall inside each bedroom and 
in  the  hallway  outside  each  separate  sleeping  area.  If  a 
bedroom  area  hallway  is  more  than  30  feet  long,  install  a 
smoke alarm at each end install a smoke alarm at the top of a 
first – to- second floor stairwell. 

Important Safety Information: 

1:The test button accurately tests smoke alarm functions. Do 

not use any other test method. Test smoke alarm weekly to 
ensure proper operation. 

2:If you're sure it isn't a really alarm, open windows or fan 

the air around smoke alarm to reset and silence it. 

3:User to install this product needs to comply with all local 

and national electrical installation and building codes. 

4:This  smoke  alarm  is  designed  to  be  used  inside  a  single 

family home only. In multifamily buildings, each individual 
living  unit  should  have  its  own  smoke  alarms.  Do  not 
install  in  non-residential  buildings  as  this  smoke  alarm  is 
not a substitute for a complete alarm system. 

5:Install a smoke alarm in every room and on every level of 

the home. Smoke may not reach the smoke alarm for many 
reasons. For example, if a fire starts in a remote part of the 
home, on another level, in a chimney, wall, roof, or on the 

17 

Содержание GS559A








Отзывы: