13 TOOLBOX SETTINGS
System
This device provides some control functions including password, IP address management,
and DHCP server function. Please go to Toolbox, and open the ‘System’ tab, to access
these functions. Below are detailed descriptions of every control function.
Password Settings
You can change the password used to enter the web configuration
menu of this device. Please input the current password in the
‘Current Password’ field, then input a new password in both the
‘New Password’ and the ‘Re-Enter Password’ field. After you finish,
please go to the bottom of the page and click ‘Apply’.
IP Management
You can change the IP address of this device, so it can become a
part of your local network. Please remember this address or you will
not be able to connect the configuration menu of device. The default
IP address is: 192.168.128.253 / Subnet Mask 255.255.255.0.
DHCP Server
If you want to activate the DHCP server function of this device,
please select ‘Enabled’ in the ‘DHCP Server’ option, and see the next
Section for detailed instructions. If you don’t want to use the DHCP
server function of this device, or there’s another DHCP server on the
All manuals and user guides at all-guides.com
