background image

 

 

and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior 
to 60 days after the cessation. 

Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder 
notifies you of the violation by some reasonable means, this is the first time you have received notice of 
violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days 
after your receipt of the notice. 

Termination of your rights under this section does not terminate the licenses of parties who have received 
copies or rights from you under this License. If your rights have been terminated and not permanently 
reinstated, you do not qualify to receive new licenses for the same material under section 10. 

9. Acceptance Not Required for Having Copies. 

You are not required to accept this License in order to receive or run a copy of the Program. Ancillary 
propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive 
a copy likewise does not require acceptance. However, nothing other than this License grants you permission to 
propagate or modify any covered work. These actions infringe copyright if you do not accept this License. 
Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so. 

10. Automatic Licensing of Downstream Recipients. 

Each time you convey a covered work, the recipient automatically receives a license from the original licensors, 
to run, modify and propagate that work, subject to this License. You are not responsible for enforcing 
compliance by third parties with this License. 

An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, 
or subdividing an organization, or merging organizations. If propagation of a covered work results from an 
entity transaction, each party to that transaction who receives a copy of the work also receives whatever 
licenses to the work the party's predecessor in interest had or could give under the previous paragraph, plus a 
right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor 
has it or can get it with reasonable efforts. 

You may not impose any further restrictions on the exercise of the rights granted or affirmed under this 
License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted 
under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) 
alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program 
or any portion of it. 

11. Patents. 

A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which 
the Program is based. The work thus licensed is called the contributor's “contributor version”. 

A contributor's “essential patent claims” are all patent claims owned or controlled by the contributor, whether 
already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of 
making, using, or selling its contributor version, but do not include claims that would be infringed only as a 
consequence of further modification of the contributor version. For purposes of this definition, “control” includes 
the right to grant patent sublicenses in a manner consistent with the requirements of this License. 

Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's 
essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the 
contents of its contributor version. 

In the following three paragraphs, a “patent license” is any express agreement or commitment, however 
denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to 
sue for patent infringement). To “grant” such a patent license to a party means to make such an agreement or 
commitment not to enforce a patent against the party. 

If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work 
is not available for anyone to copy, free of charge and under the terms of this License, through a publicly 
available network server or other readily accessible means, then you must either (1) cause the Corresponding 
Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this 
particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the 

Содержание WLM-4601








































































Отзывы: