SNMP
Simple Network Management Protocol (SNMP) is a troubleshooting and
management protocol that uses the UDP protocol on port 161 to communicate
between clients and servers. The router can be managed locally or remotely by
SNMP protocol.
Parameter
Description
SNMP
Select “Disable” or “Enable” to disable or enable the
SNMP feature.
System Description
Enter the system description of the router.
System Contact
Enter the contact person and/or contact information
for the router.
System Name
Assign an administratively name for the router.
System Location
The physical location of the router.
System Object ID
It is the vendor object identifier. The vendor’s
authoritative identification of the network
management subsystem contained in the entity.
Trap IP Address
Destination IP address of the SNMP trap.
Community name
(read-only)
Name of the read-only community. This read-only
community allows read operation to all objects in the
MIB.
Community name
(write-only)
Name of the write-only community. This write-only
community allows write operation to the objects
defines as read-writable in the MIB.
When you finish, click ‘Apply Changes’. You’ll see the following message
displayed on web browser:
