manualshive.com logo in svg

Sitecom W-119, Руководство пользователя

Поделиться
Скачать
Sitecom W-119 Скачать руководство пользователя страница 5

the service, you must first apply for an account from a DDNS service like  

http://www.dyndns.org/.  

• 

Virtual Server 

 

User can specify some services to be visible from outside users. The router can 

detect incoming service request and forward it to the specific local computer to 
handle it. For example, user can assign a PC in LAN acting as WEB server inside 

and expose it to the outside network. Outside user can browse inside web server 
directly while it is protected by NAT. A DMZ host setting is also provided to a local 

computer exposed to the outside network, Internet. 

• 

Dynamic Host Configuration Protocol (DHCP) client and server

 

In the WAN site, the DHCP client can get an IP address from the Internet Service 
Provider (ISP) automatically. In the LAN site, the DHCP server can allocate a 

range of client IP addresses and distribute them including IP address, subnet 
mask as well as DNS IP address to local computers. It provides an easy way to 

manage the local IP network. 

• 

RIP1/2 Routing

 

  Supports RIP1/2 routing protocol for routing capability. 

• 

Simple Network Management Protocol (SNMP)

 

  It is an easy way to remotely manage the router via SNMP. 

• 

Web based GUI

 

Supports web based GUI for configuration and management. It is user-friendly 

and comes with on-line help. It also supports remote management capability for 
remote users to configure and manage this product. 

• 

Firmware Upgradeable

 

Device can be upgraded to the latest firmware through the WEB based GUI.  

• 

Rich management interfaces

  

Supports flexible management interfaces with local console port, LAN port, and 

WAN port. Users can use terminal applications through the console port to 

configure and manage the device, or Telnet, WEB GUI, and SNMP through LAN or 
WAN ports to configure and manage the device. 

 
 

Package Contents 
 

• 

Sitecom WL-118 ADSL2+ router 54G – annex A,   or 
Sitecom WL-119 ADSL2+ router 54G – annex B 

• 

CD-ROM containing the full manual

 

• 

RJ-11 ADSL/telephone Cable

 

• 

Ethernet Cable

 

• 

AC-DC power adapter (12V DC, 1A) 

• 

Quick Install Guide 

Содержание W-119







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды