SITECO Informatica s.r.l
.
via della Salute 14
40132 Bologna
Tel 051/6414470
Fax 051/400589
C.F. 04014680377
P. IVA 00689691202
http://www.sitecoinf.it
File rif. C:\Users\Administrator\AppData\Local\Temp\RSC_QuickStart _rev 2_99694.doc
Created 03.04.2017
Saved il 28.07.2017
Pag. 31 di 47
DO – 7.2 – 02 Rev. 0.2 del 20.01.2017
To start a “real” sequence, choose a Sequence filename, following this naming convention:
-
Enter the MISSION name (
acronym
_
date
_
letter
, example.: BO_20170307_A),
-
Add a number for the SEQUENCE (1 for the first Sequence, 2 for the second, etc.)
Example of a resulting name: BO_20170307_A
1.
In our example, the sequence *_A1 will be the first SEQUENCE relative to the *_A mission and so on.
Adopting this naming convention, allows you to easily recognize the correspondence between MISSIONS
and SEQUENCES by simply looking at the filename. In this way, the following postprocessing operation or
any remote support action during the data processing will be easier and quicker.
After choosing the SEQUENCE name, it is necessary to select the trigger type in the case of standard
sequences, select “m” (meters) as measurement unit, and insert the camera acquisition step
.
The LadyBug
camera acquisition step is assumed by default of 3 to 5 meters. This means that, if a 3m step has been set,
the LadyBug5 camera will acquire one 360°-degree image every three meters.
The procedure to Start the SEQUENCE is the same of the TestSequence. Follow the instructions appearing
in the next pictures:
