Field Reference Guide
SITECH TECHNOLOGY DEALER
GCS900 HEX UTS Set-up
Version:
13.1
1.
Press
“Menu”
2.
Press
“F4”Mode
select “
3D UTS”
and Press
“ESC”
3.
Press
“F6”
to
Start UTS
4.
Verify
Auto search: Yes
5.
Press
“F4”
to
Start UTS
6.
Verify
UTS status: Tracking
7.
Press
“ESC”
to return to operating screen
8.
Press and Hold
to open
Bench UTS
screen
Follow instructions to position Blade over Bench Point
9.
Enter
Elevation
of
Bench Point
10.
Press
“F5 Left
or
F6 Right”
to
Bench Blade
Drive to end of work area and check Blade Elevation on a Bench Point to verify Setup
15