manualshive.com logo in svg

Site SMA400, Инструкция по эксплуатации, Страница: 9 / 12

Поделиться
Скачать
Site SMA400 Скачать руководство пользователя страница 9

9

Congratulations on your purchase of a SITE power

tool .

We  want  you  to  continue  getting the  best  

performance from it so this handbook includes

information on safety, handling and care.  

Please retain this handbook in case you need to

refer to any of the information in the future

GUARANTEE

This SITE product carries a guarantee of 12 months. 

This guarantee specifically excludes losses

caused due to:

- Fair wear and tear

- Misuse or abuse

- Lack of routine maintenance

- Failure of consumable items (such as batteries)

- Accidental damage

- Cosmetic damage

- Failure to follow manufacturer's guidelines

- Loss of use of the goods

- Unauthorised repairs

This guarantee does not affect your statutory rights.  

This guarantee is only valid in the UK

For further technical advice, spare parts or repair

service (outside of guarantee) please contact the

customer help line number on 

01908 214004

.

EN0009-1 

If your product develops a fault within this period, you

should, in the first instance contact your retailer.

Содержание SMA400













Отзывы:

Нет отзывов