Sita 405, Руководство пользователя, Страница: 7 / 16

6
Screw again the sleeve bolts and insert the lamp holder spring into the sleeve:
Carry out the hydraulic test, verifying that o-rings are watertight and that there’re not water leaks
outside the sleeve bolts or inside the quartz sleeves. Insert the UVC lamp into the quartz sleeve:
Important !
Handle the lamps using gloves
4.2 Lamp connection
Connect the lamp socket to the lamp, place the ground wire in the slot along the sleeve bolt and connect
its terminal to the M4 bolt welded on the UV chamber, insert the contact cover bringing it up to the
beat, then rotate it in closed position.
Finally connect the power cable to the socket