3 - 1 Carefully, fit the Back Assembly in place as shown
in the figure below. It will sit a little forward and
will need to be aligned in the next step. The
Upper Yolk (I) fits just under the arms and the
Lower Yolk (J) will sit on top of the rear legs.
Figure 3
4 - The last step is to tighten the Bolts (A) and Hex Nuts (D) on your new Adirondack. Use the supplied Allen
Wrench and an Adjustable Wrench to tighten all 8 connections from Steps 1 and 2. Tip the chair upright
and assembly is complete.
I
J
B
B
push forward against seat slats
( Seat Back )
H
B
A
C1
D
C
CARE AND MAINTENANCE
To clean your product, use mild soap and water. For heavy soil build-ups use any non-abrasive household cleaners
or ask your Sales Representative about Sister Bay Furniture Cleaner.
Please contact our Customer Service Department for assembly assistance, questions or replacement parts at 1-866-947-7632
or email [email protected]. Our Customer Service Department is available Monday - Friday from 8:30 a.m. to 4:30 p.m. EST
B1
3 - 2 With the Back Assembly in place, we can attach
the assembly from Figure 2 to part (G) Seat Back,
using (4) of screw (B) and (3) of screw (B1) tighten
screws using a Phillips-head screwdriver. With the
Lower Yolk (J) aligned with the back of the Seat
Assembly, push the lower end of the Seat Back
forward against seat slats and use a #2 Phillips
Screwdriver to tighten the 3 screws (B1). Next,
attach the Upper Yolk (I) to each arm using (2) of
screw (B) in each side.
