Figure 3
( Detail 4 )
3 - Attach part ( H ), Front panel, to assembly from
Figure 2, as shown in Figure 3, see detail 4 using
( 4 ) of screws ( A ) , 2 on each side, tighten screws
using an allen wrench .
A
Figure 4
FRONT PANEL
H
I
COVER
4 a - Attach part ( I ), Box Cover, to assembly from Figure 3, as shown in Figure 4, see detail 5, using ( 9 ) of screw ( B ) ,
3 on each Hinge, tighten screws using a phillips-head screwdriver.
4 b - Attach part ( C ), Shock Absorber, to assembly from figure 4 see detail 6. Push the shock absorber adapter onto
the bracket located on the cover and inside the box (1 on each side), repeat for opposite side, see detail 6.
( Detail 5 )
* Note: When attaching the cover, It is recommended to be a ( 2 ) person operation. It is important to
support the cover until hinges and both shock absorbers are installed to avoid damage to hardware.
B
( Detail 6 )
Snap to joint
Shock Absorber
C
CARE AND MAINTENANCE
To clean your product, use mild soap and water. For heavy soil build-ups use any non-abrasive household cleaners
or ask your Sales Representative about Sister Bay Furniture Cleaner.
Please contact our Customer Service Department for assembly assistance, questions or replacement parts at 1-866-947-7632
or email [email protected]. Our Customer Service Department is available Monday - Friday from 8:30 a.m. to 4:30 p.m. EST
