Hardware and Parts
(8)
Do not use
any hand drill
on this product
Assembly Instructions
ALLEN WRENCH
( included )
B
BACK PANEL
Figure 1
You will also need a phillips-head screwdriver
( not included )
D
(9)
A
I
G
F
1.25
(2)
C
1- Attach part ( E ), Left panel, and part ( F ), Right panel, to part (D),
Back panel as shown in figure 1, see detail 1 using ( 4 ) of screws ( A )
2 on each side, tighten screws using an allen wrench . For proper
positioning on ( E ) Left panel and ( F ) Right panel make sure that
shock bracket is located on the inside of the box see detail 2.
Figure 2
2 - Slide part (G) Base, into assembly from figure 1, as shown in Figure 2, see detail 3 and center inside assembly.
E
2.50
SHOCK ABSORBER
RIGHT PANEL
COVER
F
RIGHT PANEL
BACK PANEL
D
A
( Detail 1 )
G
BASE
( Detail 3 )
slide & push
slide & push
H
( Shock Bracket )
(RECESS FOR HINGES)
( Detail 2 )
Item No: MCUS-B
Cushion Box
Assembly Instructions
Inside view
Shock Bracket
must be on the
inside
LEFT PANEL
E
FRONT PANEL
BASE
LEFT PANEL
