Figure 5
4 - Attach the Assembly from figure 4, ( Glider Seat ) to Assembly
from Figure 3, ( Glider Base assembly ) as shown in Figure 5 See
detail 7 using for each leg ( 1 ) of joint connector bolts ( B ) ,
( 2 ) washers ( D2 ), ( 1 ) Lock washers ( E2 ) and ( 1 ) hex nuts
( F2 ), tighten bolts using an allen Wrench and also an adjustable
wrench. Follow the same instructions for right side of glider base.
B
D2
E2
F2
3,a - Attach part ( J ), Right side front and rear leg assembly, to assembly from Figure 3 as shown in Figure 4,
Make sure identification marks ( FR ) and ( RR ) are facing inside towards the seat see detail 4, using ( 2 ) of
joint connector bolts ( A ), ( 2 ) washers ( D1 ), ( 2 ) lock washers ( E1 ), ( 2 ) hex nuts ( F1 ), see detail 5
tighten bolts using an Allen wrench and also an adjustable wrench. Follow the same instructions for left side
front and rear leg assembly.
Q
Left Side
leg Assembly
C
( Detail 6 )
Seat Back
Assembly
H
C
A
( Detail 5 )
J
A
A
D1
E1
F1
identification marks
Right side
leg Assembly
(FR)
(RR)
( Detail 4 )
3,b - Attach part ( J ), Right side front and rear leg and part to seat back assembly ( H ), as shown in Figure 4, see
detail 6, using ( 1 ) of lag screws ( C ), tighten screws using and Allen wrench. Follow the same instructions for
left side front and rear leg assembly.
C
( Detail 7 )
Figure 4
CARE AND MAINTENANCE
To clean your product, use mild soap and water. For heavy soil build-ups use any non-abrasive household cleaners
or ask your Sales Representative about Sister Bay Furniture Cleaner.
Please contact our Customer Service Department for assembly assistance, questions or replacement parts at 1-866-947-7632
or email [email protected]. Our Customer Service Department is available Monday - Friday from 8:30 a.m. to 4:30 p.m. EST
