Siselectron SWE2520 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 50

Siselectron SWE2520 Скачать руководство пользователя страница 3

Introduction

Key Features

• High transmit power, enabling long range connectivity

• Three internal 4 dBi (2.4 GHz) and three 5dBi (5 GHz) omni-directional

MIMO antennas

• Dual Band/Three Stream

AC compatible computers and devices

• Secured Guest Network

Introduction

can be used with

802.3at

capable switches or injectors

with AC client devices. It can be configured as an Access Point, Client
Bridge, or WDS (AP & Bridge) and features a high transmit RF power of 28
dBm transmit RF

• Can be used with included power adapter or via PoE with PoE

802.3at -

capable Switches or Injectors

• Supports IEEE802.11ac/b/g/n wireless standards with up to 450

Mbps

data rate on 2.4GHz and 1300Mbps data rate on 5GHz

• Band Steering shifts dual band clients to the 5 GHz band for to relieve

network congestion on the 2.4 GHz band

The SWE 2520 leverages

the breakthrough speed and

performance 802.11ac

performance 802.11ac for connecting to laptop

s

and other devices that need

to

wirelessly stream HD

video

or transfer large

files.The

SWE

2520 is

an

802.11ac 3x3 Indoor Access Point. This high-poweredceiling mount Dual Band

Access Point features speeds up to 450 Mbps on 2.4 GHz and up

to

1300 Mbps on the 5 GHz band when associated

power on the

2.4 GHz band and 26 dBm on the 5 GHz band

for long range connectivity. The SWE 2520 includes a Gigabit Ethernet port for
connecting to 802.3at-capable PoE Switches and an enhanced receive
sensitivity

NIMO

(Multiple In / Multiple

Out) Out) integrated sectorized 3D

antenna array.

•

Siselectron

Technology

Ltd

seeks the most efficient signal path to

Maximum  data  rates  are  based   on  IEEE  802.11  standards. Actual  throughput and  range   may  vary  depending on  many  factors  including   environmental conditions,  distance   between
devices,  radio  interference   in the  operating environment, and  mix of devices  in the  network.  Features  and  specifications   subject  to  change   without   notice.  Trademarks and  registered
trademarks     are    the     property     of    their    respective     owners.

F

or

Taiwan

: Copyright © 2015 Siselectron Technolog

y

Ltd

. All rights reserved.

1

«
1
2
3
4
5
...
»

Содержание SWE2520



















































Отзывы:

Нет отзывов