14xD
3xD
3xD
5
2xE
*** For technical support please call 1.800.374.7438 #2007, [email protected] ***
Page: 3 of 5
Elle Series
4-Leg Electric
5. Attach adjustable crossbar ends(2) to
worksurface using two M5x50mm wood screws(F),
and adjustable crossbar center(2) to the
worksurface using fourteen M5x25mm wood
screws(D).
6. Attach L-Brackets to worksurface using six
M5x25mm wood screws(D)
7. Attach control switch to worksurface using two
M4x16mm panhead wood screws(E).
NOTE:
For frame models that do not utilize a cable
tray, mount control box(4) to underside of
worksurface using two 4x50mm screws(G).
8. Flip the table upright, and lower the cable
tray(8) by loosening the machine screw locks, and
sliding them towards the center of the tray.
Tools required: Drill driver, PHILLIPS bit PH2.
F
F
F x 2 (5x50mm)
R011029
E x 2 (4x16mm)
R011500
D x 20 (5x25mm)
R011528
G x 2 (4x50mm)
R011501
