4xB
A
A
1
1
2
3
3
*** For technical support please call 1.800.374.7438 #2007, [email protected] ***
Page: 1 of 5
Elle Series
4-Leg Electric
Components Required:
1. Leg upright x2
2. Adjustable Crossbar x1 (3 Pieces)
3. L Brackets x2
4. Control box x1
5. Control switch x1
6. 120v Power Cord x1
7. Network Cable x4
8. Cable tray x1 (Optional)
9. Hardware Bag x1
10. Battery Pack x1 (Optional)
11. DC Cable with 2-pole minift plug x1 (Optional)
12. Hook & Loop (150mm) x2
13. Hook & Loop (350mm) x1
Assembly Steps:
1. Attach leg uprights(1) to ends of adjustable
crossbar (2) and L-brackets(3) with four M8x20mm
machine screws (B) per component.
2. Attach adjustable crossbar center(2) to
adjustable crossbar ends with two M8x12mm
machine screws(A).Set the spacing for the
adjustable crossbar(2) so that the overall width of
the frame corresponds with the overall width of the
table top to be mounted
NOTE:
Depending on frame model, table may not
include optional cable managemet tray (8). If not,
skip to step 6 on page 3.
Tools required: Drill driver, PHILLIPS bit PH2. Hex key 4mm and 5mm.
A x 2 (m8x12)
R011065
B X 16 (m8X20)
R011009
5mm HEX WRENCH
R011905
4mm HEX WRENCH
R011921
C x 4
RM-175
4xB
4xB
4xB
C
C
C
C
