Siruba D007R(B), Оригинальное руководство пользователя

Страница: 20 / 35

-18-
3-5-2
調整左右量的方法，先鬆開螺母
e
，由
螺絲
f
上下位移，使得指針
d
左右調整角度變
化，向右調整運動量變少，向左調整運動量增
加
(
圖二
)
。
*
注意！螺母
e
位在螺紋方向，非一般右螺紋，
故在拆裝時，順時針方向為鬆開，逆時針方向
為鎖緊，應特別注意！並在鎖緊時，施力需適
當，過緊將造成零件卡死，轉動阻力備增而故
障。
3-5-2 To adjust the angle of looper moved right
& le
ft
posi
ti
on, loosen the nut “e” and moved the
screw “f” for adjus
ting.
The angle will be
decreased when the screw be moved to the righ
t.
The angle will be increased when the screw be
moved to the le
ft.
(Fig 2)
*Notice!!
The screw “e” is a le
ft
-handed thre
ad!
It’s di
ff
erent than normal screw
.
Please loosen
the screw by clockwise and
tig
hten it by
counterclockwise
.
Please
tig
hten the nut “e” in
appropriately
.
If the nut “e” is
tig
hten up too
much.
The machine is going to be stuck in easily
.