Siruba ASC-TBH100A, Руководство пользователя, Страница: 35 / 65

...............................................................................
HEM MACHINE
3
INTRODUCTION
A. Install & Debug & Test
1.
Ventilation test.
Connect the ventilation source, open the total valve
switch, confirm that there is no leakage sound, and each
cylinder has been ventilated and the initial state is correct,
if not correct, please adjust the vent hole.
2.
POWER switch Test.
Plug in and turn on the power-on switch to see if the
machine starts properly. Turn off the power-on switch to
see if the machine shuts down properly.
3.
Solenoid valve Test.
Connect the ventilation source and power, boot press the
language selection key of the homepage, enter the main
interface.
Press machine
Control key to enter machine
control interface.
Press Electromagnetic
inspection key into the
Solenoid valve test Interface
(P19, reference solenoid valve
detection Interface).