61 93 556 D3509
47
D3509
.
201.01.02
.
02
19.09.2008
4 Operation
Sirona Dental Systems GmbH
Patient chair
Operating Instructions TENEO
Via the 4-way switch
¾
Slide the upper 4-way switch to the left or right.
Via quick mechanical adjustment
1.
Hold the headrest securely in place before unlocking it.
2.
Press buttons
A
together.
ª
The headrest is thus disconnected from the motor drive and can be
tilted manually.
4.4.7
Adjusting the MultiMotion headrest
The MultiMotion headrest enables you to adjust the patient's head in a way
that optimally supports viewing of hard-to-access areas of the patient's
mouth.
4.4.7.1
Patient height adjustment
The headrest can be adjusted to the patient's height by pulling out or pushing
in the headrest extension.
4.4.7.2
Setting the jaw position
The MultiMotion headrest enables you to change between the maxillary and
mandibular positions without adjusting the headrest extension. The
anatomical movement of the arched extension keeps the patient's head in the
support.
A
A
NOTE: Treatment without readjustment
Before positioning the patient on the headrest, make sure that the head
support has been optimally adjusted to the patient's height. This simplifies all
subsequent work with the MultiMotion headrest considerably, since
readjustment to the patient's height can thus be omitted when changing over
from mandibular to maxillary treatment.
