Sirona Orthophos XG 3D/Ceph, Руководство по установке

Страница: 97 / 268

63 03 452 D3352
D3352
.
031.05.08
.
02 10.2015 97
Sirona Dental Systems GmbH 11 Initial startup
Installation Manual ORTHOPHOS XG 3D / Ceph 11.2 Inserting the forehead and temple supports
båÖäáëÜ
4. Use the 4 screws (A) to fasten the assembled housing cover to the
unit.
5.
For installation with floor stand only:
Place the four spring clips (E) on
the base plate. The two covers (F) and (G) must hold together after
they have been attached.
6. Screw holder (H) to the column with screw (I).
7. Clip on the profile (K).
8. NOTICE! Make sure that intermediate piece (J) lies flush on the stand
surface.
Insert intermediate piece (J) in the gap.
11.2
Inserting the forehead and temple supports
➢ Insert the forehead and temple supports until they lock in place.
A
G F
E
K
J
I
H