Sirona CEREC MC XL Premium Package, Руководство по эксплуатации

Страница: 24 / 78

63 98 536 D 3439
24
D 3439
.
201.06.10
.
02 10.2017
5 Installation and startup Dentsply Sirona
5.4 Commissioning Operating Instructions CEREC MC XL Premium Package
Search for unit manually
The unit is connected to the PC via a LAN cable or via WLAN.
1. Click the
"Configuration"
button in the system menu.
2. Click on the "Devices" button.
3. Click on the
"Add Device (Manual)"
button.
4. Set the network.
5. Enter the network address which appears on the
"IP address:"
display once the milling and grinding unit has been switched on.
6. Click on the
"Ok"
button.

The software attempts to contact the device.
If the connection fails, check the connection. If necessary, ask a qualified
technician.
Unit removal
✔
If you no longer require a unit (e.g. a unit is replaced), you can remove
it.
✔
The unit is operation.
1. Click the "Configuration" button in the system menu.
2. Click on the
"Devices"
button.
3. Click on the unit that you wish to uninstall.
4. Click on the
"Delete Device"
button.

You will be asked if you would like to remove the unit.
5. Click on the
"YES"
button.

The device is removed.