3
PRECAUTION BEFORE USING YOUR INDUCTION HOB
1. The glass top is of strong, hard, and non-porous properties. But, in case of breakage,
even it's only slight cracking, disconnect the appliance from the mains immediately
and contact the after-sales service.
2. The appliances is equipped with 'small object detector'. But, it's recommended not to
place metal kitchen utensils, pan lids, knives, or other metal objects on the induction
heating zone. If an inductor is switched on, there is a risk of becoming hot.
3. When using your induction hob, don't place any magnetable objects on the glass top,
such as credit cards, cassettes, etc.
4. Scientific tests have shown that the induction hob presents no danger. Whatsoever,
for persons using pacemaker, please keep 30 cm distance from the unit while the in-
duction hob is in using.
5. To prevent from overheating, do not place aluminum-foiled or iron plate on the top
plate.
6. Put the appliance on a horizontal surface but keep away from wall or articles at least 5
-10 cm.
7. Do not put any articles like iron wire or tools into the air entrance or outlet to prevent
from electric shock.
8. Immediate clean-up is recommended when water left on the top plate.
OPERATION INSTRUCTION
1. Plug power cord into 230V., 50Hz, 15A power socket.
2. Turn on power by rotary the power control knob, power level display led will light on.
3. Rotary power control knob clockwise, the power level led will display from step.1 to
step.9.
4. Put a suitable pan on central position of top plate, and rotate power control knob to
desire power level. Step.1 position is the minimum, step. 9 position is the maximum.
5. Heating indicator light will indicates the pan is suitable or not. If the Heating indicator
light is on, then the pan is heating. If the Heating indicator light is off, It indicates that
the power is on, but no pan or no suitable pan is on top plate position.
6. This unit is equipped with 'over heating protection device', which will stop power tem-
porally when top plate temperature reaches 230°C (+/-20°C). The power will start a-
gain automatically when the temperature of top plate reduced under 230°C (+/- 20°C).
If you put an empty pan on it, and heat-up at max. Power, it will reach 230°C very so-
on. So, the safety device will stop output power temporarily to prevent overheating.
Upon this situation, the Heating indicator light will flash to indicate the over heating
protection function is on.
7. Temperature holding function: Push “Temperature” function key, the temperature
holding function will start working. The LED indicate the temperature holding at 60°C
(+/- 5°C), push “Temperature” function key again, the LED indicate the temperature
holding at 80°C. “Temperature” function key pushed each time, the holding temperatu-
re will be changed as a circulate mold. 60°C -> 80°C -> 140°C -> 180°C - > 220°C ->
60°C ->
8. When Temperature holding function working, the “Temperature” indicator light will
start flashing. It’s mean the temperature not yet arrived the setting temperature. When
the pan’s temperature arrive the settino temperature, the Temperature” indicator light
will keep steady on.
9. Change Temperature holding function to “Power” function: Push “Power” function key,
and the function will back to “Power” again. Then the rotary control knob will be activa-
ted again.
Control Panel:
1. Power On/ Off Key.
2. “Heating” indicator light.
3. “Potenza” function indicator light.
4. “Temperature”(Holding Temperature) function indicator light.
5. “Temperature”(Holding Temperature) function key.
6. “Heat” function key.
7. Power Level / Holding Temperature display LED lights.
8. Power regulator rotary knob.
FEATURES & DESCRIPTION:
1.
2500 watt Induction Heating Zone
2.
Ceramic Top Plate
3. Bottom
Chassis
4.
Rotary Control Knob. (Power regulator)
5.
Induction Heating Indicator Light
6.
Heat function indicator light.
7.
“Temperature” function Indicator Light
8. Air-Intake
2
3
7
1
5
6
4
8
4
6
1
2
9
3
10
5
7
4
8
