4
HOW DOES YOUR INDUCTION HOB WORK?
A high frequency (20-35KHz) induction coil underneath the surface ceramic top plate
heats the cooking utensil by magnetic friction. The heat is produced directly within the
pan. It's controlled by electronic circuit to offer superior performance and functions. When
you switch off, the cooking is stopped immediately.
PRECAUTION BEFORE USING YOUR INDUCTION HOB
1. The glass top is of strong, hard, and non-porous properties. But, in case of breakage,
even it's only slight cracking, disconnect the appliance from the mains immediately
and contact the after-sales service.
2. The appliances is equipped with 'small object detector'. But, it's recommended not to
place metal kitchen utensils, pan lids, knives, or other metal objects on the induction
heating zone. If an inductor is switched on, there is a risk of becoming hot.
3. When using your induction hob, don't place any magnetable objects on the glass top.
4. Scientific tests have shown that the induction hob presents no danger. Whatsoever,
for persons using pacemaker, please keep 30 cm distance from the unit while the
induction hob is in using.
5. To prevent from overheating, do not place aluminum-foiled or iron plate on the top
plate.
6. Put the appliance on a horizontal surface but keep away from wall or articles at least 5
-10 cm.
7. Do not put any articles like iron wire or tools into the air entrance or outlet to prevent
from electric shock.
8. Immediate clean-up is recommended when water left on the top plate.
OPERATION INSTRUCTION
1. Put a suitable pot in the center of the cooking surface..
2. Connect plug to a 230V/ 50Hz 15A outlet. Pilot light turns on confirming correct power
connection.
2. Push ON/OFF button, pilot light turns on. Heating starts at default power (IH27 = 1500
watt. / IH35 = 2000 watt)
3. Set desired power (IH27 = 500-2700W / IH35 500-3500W), push “Power” button and
change displayed setting using + and - buttons.
6. When pushing Heating/Temperature button, corresponding light will turn on and
temperature hold function starts. Default temperature is 100°C. Set desired
temperature, from 60 up to 240 °C, using + and – buttons.
7. Set cooking time from 0 up to 180 minutes. Below 30 minutes: 1 minute/step
regulation. Above 30 minutes: 10 minutes/step regulation.
8. When pushing ON/OFF while plate is working, heating will stop. Cooling fan goes on
and stops after 1 minute automatically.
9. After pushing the ON/OFF button, the machine will turn off completely if not used in
the following 2 hours.
5
1
2
3
4
6 5
7
Control Panel IH 35 - IH35Wok:
1. “-” down button.
2. “+” up button.
3. “Temperature” button, sets temperature.
4. “ON/OFF” button, turns the plate on/off.
5. “Power” button, sets output power.
6. Pilot lights, turn on when selecting the corresponding function.
7. Display, indicates current settings.
8. “Timer” button, sets cooking time.
Control Panel IH 27:
1. “-” down button.
2. “+” up button.
3. “Heating” button, temperature hold function.
4. “ON/OFF” button, turns the plate on/off.
5. Pilot lights, turn on when selecting the corresponding function.
6. Display, indicates current settings.
7. “Timer” button, sets cooking time.
1
2
3
4
8
7
5
6
6