4
CHAP. 1 - INFORMATION ON THE MACHINE
1.1 - GENERAL PRECAUTIONS
The machine must be operated only by highly qualified people who are fully
aware of the safety measures described in this manual.
In case of a personnel turn over, training is to be provided in advance.
Before starting cleaning and maintenance operations, disconnect the plug from the
supply socket.
Assess the residual risks carefully to carry out cleaning and maintenance.
Cleaning and maintenance require great concentration.
A regular control of the electric supply cord is absolutely necessary; a worn-out or
damage cord is very dangerous.
If the machine shows malfunctions, it is recommended not to use it and to abstain
from trying to repair it; please call the “Service Centre”.
The PANCAKE OVEN is used to cook pancakes. Do not use the machine for
other uses or for any products other than foodstuff .
The manufacturer is not liable in the following cases:
if the machine has been tampered by non-authorized personnel;
if some parts have been substituted by non original spare parts;
if the instructions contained in this manual are not followed
accurately
;
if the machine surface is not cleaned with the right product.
1.2 - SAFETY DEVICES INSTALLED ON THE MACHINE
The mechanical safety devices installed on the machine, described in this manual,
comply with
EC 2006/42
.
The electrical safety devices installed on the machine, described in this manual,
complies with
EC 2006/95, 2004/108
and regulations
EC EN 60335-1, EN 55014.
Even though the PANCAKE OVENis provided with electrical and mechanical
protections (when the machine is working and for maintenance and cleaning
operations), there are still
RESIDUAL RISKS
that cannot be eliminated completely,
these risks are mentionned in this manual under
WARNING
. These risks are scalds
caused by the loading and unloading of the product , or other kind of injuries due to
the maintenance operations.
1.3 - DESCRIPTION OF THE MACHINE
1.3.1 - General description
Our firm has designed and manufactured the PANCAKE OVEN to cook pancakes
and to guarantee:
-
the highest degree of safety in functioning, cleaning and maintenance;
-
the highest hygienic standard due to an accurate choice of materials which come
into contact with the foodstuffs;
-
the lowest loss of heat produced by the resistances;
-
solidity and stability of all the elements;
-
great handiness.
9
4.4 - FUNCTIONING CHECK
To check the functioning of the appliance, follow the instructions below:
1. connect the appliance to the power supply
(ref. 2 FIG. n°6)
and check that the
pilot lamp turns on;
2. rotate the thermostat knob
clockwise (ref.1 FIG.n°6)
standing in front of the
knob;
3. check that the lateral pilot lamp turns on
(ref. 3 FIG. n°6)
. When the plate reaches
the temperature, the pilot lamp turns off.
CHAP. 5 - USE OF THE MACHINE
5.1 - CONTROLS
The controls are placed as indicated below.
1. Thermostat knob;
2. Pilot lamp, it indicates that the machine is
connected to the network;
3. Pilot lamp, it indicates that the resistors are on.
5.2 - FIRST USE OF THE MACHINE
When the machine is delivered, the steel surfaces are protected with a nylon anti-
scratch film. This film has to be removed accurately before starting the machine and
pay attention to remove eventual residuals of glue.
To perform this operation, do not use sharpening tools, inflammable or abrasive
substances.
The insulating materials used during the manufacturing and the residuals of grease
due to the mechanical installation of single parts, heat and produce smoke
, for this
reason, it is necessary to start the machine outside, putting it at the maximum
for 15-20 minutes and let it function without mixture.
5.3 - PRODUCT LOADING
WARNING:
When you pour the product on the plate to cook it, this must be hot, so
pay attention to residual risks due to burning dangers.
To load the product follow this procedure:
1. place yourself in a correct position
(FIG. n°7), avoiding any contact with the
machine;
2. turn on the appliance by means of the thermostat knob and regulate the heating
intensity;
3. wait that the cooking plate heats. The preset temperature is reached when the pilot
lamp turns off
(ref. 3 FIG. n°6)
;
FIG. n°6 - Controls position
3 1 2
