Page 2
Satellite Radio Superstore | 800.513.8554 | www.satelliteradiosuperstore.com | [email protected]
Figure #2
Next, locate the black, round, flat foam gasket affixed to the paper backing. Gently
peel the gasket from the backing. Place the sticky side toward the antenna wire in the
groove in the flange and affix the gasket to the mating channel in the flange.
Press the gasket firmly into place.
If the surface that you choose for your XM® marine antenna is wood or fiberglass, use
the four supplied #8-18 x ¾ stainless steel, self-tapping screws for firmly mounting the
antenna to the chosen surface.
To mount the XM® marine antenna to metal, use marine-grade stainless steel machine
screws and mating lock washers and nuts, available from your local marina, marine
supply, or hardware store.
Take care to not over-tighten self-tapping screws to prevent stripping the mounting
holes.
Route the antenna wire to the location of your SIRIUS XM Radio receiver.
Method Two:
Weave the pig-tail of the XM® marine antenna through the center hole of the flange
mount adapter then attach the flange mount adapter to the XM® marine antenna using
the four M4 x 0.7 x 10 Philips pan head stainless steel screws (with blue sealant).
If you choose method two, use a ½-inch (1.27 mm), drill bit and drill a hole at the
cross hairs in the center of the antenna mounting area for the antenna cable.
Locate the black, round, flat foam gasket affixed to the paper backing. Gently peel the
gasket from the backing. Place the sticky side toward the flange and affix the gasket to
the mating channel in the flange. Press the gasket firmly into place.
Route the XM® marine antenna cable through a center hole.
Securely tighten the 25’ (7.62 m) antenna cable to the pigtail leading out of the XM®
marine antenna.
If the surface that you choose for your XM® marine antenna is wood or fiberglass, use
the four supplied #8-18 x ¾ stainless steel, self-tapping screws for firmly mounting the
antenna to the chosen surface.
To mount the XM® marine antenna to metal, use marine-grade stainless steel machine
screws and mating lock washers and nuts, available from your local marina, marine
supply, or hardware store.
Take care to not over-tighten self-tapping screws to prevent stripping.
Route the antenna wire to the location of your SIRIUS XM Radio receiver.
Figure 2
