Sirius XM RAdio SXV300, Руководство по аксессуарам

Страница: 15 / 24

© 2015 Sirius XM Radio Inc. Commander Touch Template 150728a
Installing the Commander Touch Display Controller Using the Flush Mount
A.
Locate a suitable place in your dash or center console for installing the
Flush Mount. The Flush Mount requires an opening of 48mm high x 110mm
wide, and an approximate clearance behind the dashboard or console of
25mm depth to accommodate the Mounting Brackets. Avoid any location
which will block or interfere with an airbag, or a location which interferes
with the safe operation of the vehicle.
B.
Place the template on the area selected and carefully cut the opening,
following the outline on the template.
C.
Once the opening has been cut, remove the template and place the
Flush Mount in the opening. The Flush Mount is asymmetrical so the
top/bottom orientation is not important.
D. Bend each of the two Mounting Brackets into a U shape.
E. Attach the Mounting Brackets to the rear of the Flush Mount, using the
provided 4 screws. Position the legs of the Mounting Brackets against the
inside of the dash or console surface and tighten the screws. Note that you
may need to bend or cut the ends of the mounting brackets depending on
the specific application.
F. Once the Flush Mount is secured in place, insert the Commander Touch
Display Controller into the Flush Mount. First, route the cable from the left
side of the Display Controller into the opening at the bottom left of the Flush
Mount, and then gently press the Display Controller into the Flush Mount, left
side first and then the right side. It will snap into place.
G. Route the cable from the Display Controller to the place behind the dash or
center console where you plan to install the Tuner Module.
A. - B.
C.
D.
F.
E.
Commander Touch Installation Template
Model #: SXVCT1T
Products
14
Aftermarket
Accessory Guide