Sirius XM RAdio Onyx Plus, Руководство пользователя

Страница: 38 / 124

38
7. Ensure Onyx Plus is tuned to channel
1, the XM Preview channel. Upon
power up, Onyx Plus should tune to
channel 1 by default, when it’s not yet
activated. If it’s not on channel 1, refer
to “Listening to Satellite Radio” on
page 51 to learn about how to tune
a channel.
8. Turn on your vehicle’s stereo system.
Set it to play from the auxiliary input
source. You should hear XM channel 1
through your vehicle’s stereo system.
You are now ready to activate your
Onyx Plus.
9. Go back to “Step 2: Install the
Adhesive or Vent Mount” on page
14 and finish installing the Dash or
Vent Mount. Then the installation is
complete.
10. The audio level output of Onyx Plus can be increased or decreased as
necessary to match the audio levels of other sources in your vehicle.
Refer to “Audio Level” on page 100.
If the signal reception is good, showing at least two bars in the lower
left corner of the display, but there is no XM audio, be sure the vehicle’s
stereo system is set to the auxiliary input source (step 8). Also be sure
that the audio level is set high enough to be heard (step 10). Refer to
“Troubleshooting” on page 113 for additional help.
Vehicle Installation