Sirius XM RAdio Onyx EZ, Руководство пользователя

Страница: 30 / 88

30
• SUV:
1 . Feed the antenna cable underneath the rubber weather stripping
of the rear tailgate window/door and route the cable along the rear
hatch . Lift the weather stripping from the opening and tuck the cable
inside it, then replace the weather stripping . Pull the cable out from
weather stripping and route it into the cabin under the interior trim .
Avoid hinges or gears that could crimp or cut the cable .
2 . Route the cable through the SUV’s main cabin area under the interior
trim, towards the front of the vehicle . Use a blunt plastic putty knife
or similar blunt tool to lift the plastic trim just enough to tuck the
cable under underneath . Avoid side airbag locations on back pillars
and above the doors . Airbag locations are marked with “SRS” logos .
Be careful not to crimp or cut the cable .
3 . Bring the cable out from the trim near the front of the cabin and route
it under the carpet toward the dashboard or console . Coil any excess
cable in a hidden location, such as under the carpet, keeping it away
from any vehicle pedals or controls . Secure the excess cable with wire
ties (purchased separately) .
4 . Bring the end of the cable out at the Power Connect Vehicle Dock
location . Leave yourself
enough cable so you can
easily connect it to the
antenna connector of the
dock .
5 . Continue with “Step 5:
Connect the Magnetic Mount
Antenna and PowerConnect
Power Adapter” on page
34 .
Vehicle Installation