[
Installation
]
11
Alternate Mounting Methods
The mounting plate can be removed allowing the
SCC1 to be mounted directly to a surface using
either double-sided stick tape, hook and loop, or
other adhesive material. Simply remove the 2
screws on the bottom of the SCC1 tuner to remove
the bracket, as shown in Figure 3 (right). If using
adhesive material, avoid covering the SID label.
Combining with a SiriusConnect Interface device
Some third-party interfaces are designed with the same asymmetrical chassis as the
SCC1. To connect the units together, simply remove the mounting brackets from each
unit, rotate them 90° and connect as shown in Figures 4 and 5 below.
figure 3
figure 4
figure 5
