FM Transmitter Options
If you would like to use the built-in FM Transmitter, you must turn ON the function and select an FM frequency:
1. Use the Channel Switch to highlight “FM Transmitter”. Press SELECT.
2. Use the Channel Switch to select “FM On/Off”. Press SELECT.
3. Use the Channel Switch to select “On”. Press SELECT.
4. Use the Channel Switch to highlight the “Frequency”. Press SELECT.
5. Use the Channel Switch and Category Buttons to adjust the FM frequency. The Channel Switch adjusts in 0.1 MHz increments and the
Category Buttons adjust in 1 MHz increments.
Display Settings
It is possible to adjust the Brightness and Contrast of the receiver’s display. While in the “Menu Options” list, use the Channel Switch to
highlight the display setting you wish to adjust. Press SELECT to select.
1. Brightness Control: Adjusts the overall intensity of the display to help with viewing in different lighting conditions. Use the Channel
Switch to adjust brightness up or down. The bar graph at the bottom of the screen will move to indicate the change.
2. Contrast Control: Adjusts the relationship between the background and the text on the LCD display. Use the Channel Switch to adjust the
contrast up or down. The bar graph at the bottom of the screen will move to indicate the change.
To exit the Display settings, push the MENU button
Auto Select
With Auto Select turned OFF, you must press SELECT in order to tune to a highlighted channel in any of the list modes. Turn Auto Select ON
if you would like to automatically tune to the highlighted channel without pressing SELECT. This will allow you to quickly listen to all the
available programming on a given list. The default is OFF. To change the Auto Select option, perform the following:
1. From the Menu, use the Channel Switch to highlight “Auto Select”. Press SELECT.
2. Use the Channel Switch to Select “ON” or “OFF”. Press SELECT to set the option.
To exit, push the MENU button.
Signal Indicator
1. Use the Channel Switch to highlight “Signal Indicator”. Press SELECT.
2. Two 10 segment horizontal bar graphs will be displayed (SAT and TER) with a “-“ sign to the left and a “+” sign to the right. SAT indicates
satellite signal and TER indicates terrestrial signal – if available.
3. Adjust the antenna for greatest signal reception.
To exit this function, press SELECT or MENU.
Confirm Tone Options
The receiver will sound an Audio “Tone” alert when the unit powers ON and OFF as well as when the S-Seek Alert is activated. The default
is ON. To change the tone options, perform the following:
1. From the Menu, use the Channel Switch to highlight the “Confirm Tone”. Press SELECT.
2. Use the Channel Switch to Select “ON” or “OFF”. Press SELECT to set the Tone Option.
