Step 6.
In the ‘Hyperterminal’ command window, type in the command:
AT<cr>
The command window will respond with:
OK
Your ZEST is now connected and ready to start communication.
Mounting the ZEST
The ZEST has an integrated DIN rail mount housing which allows the unit to connect
on to the standard rail widely used for mounting industrial control equipment inside
equipment racks. This has been adopted as a European (EN) and International (ISO)
Standard.
Hook the bottom modem DIN rail clip
onto the bottom of the DIN rail
Push modem 45° until the top DIN rail
clip locks onto the top of DIN rail
1
1
2
1:1 @ A3 Sheet Size
A
B
C
D
E
F
G
H
I
7
6
5
4
3
I
H
G
F
E
D
C
B
2
A
1
AMENDMENTS
JOB NUMBER
Concept
DRAWING TITLE
STATUS
PROJECT INFO
UK
COPYRIGHT WARNING
These drawings and designs remain
the property of Sequoia Technology
Group. Any unauthorised use will
render the offender liable for damages.
ALL DIMENSIONS ARE IN Millimeters UNLESS OTHERWISE
STATED
SA11214
4.0
Complete assembly
Robustel Enclosure
Mounting
Siretta
06/02/2014
B.Hulman
DRAWING: X:\Sequoia Design\Siretta\Robustel Module\ Robustel As
sembly
MODEL: X:\Sequoia Design\Siretta\Robustel Module\ Robustel Asse
mbly
DESIGNER
26/08/2014
ISSUE DATE
DO NOT SCALE OFF DRAWING
EMAIL [email protected] FOR DXFS OR OTHER
SCALABLE FILES.
Page No: 08 /08
GENERAL NOTES:
PART NUMBER
REV
SCALE
4.0_Updated colour and added silk
screen_28/03/14_BH
3.0_Adjusted to suit findings from 3D
print prototypes. Added
logo._12/03/14_BH
2.0_Revised as per drawings supplied by
supplier_03/03/14_BH
1.0_Preliminary issue_07/02/14_BH
2
