BEFORE THE FIRST USE
Before first use rinse Sirena Espresso Machine with warm water as follows:
1.
Open water tank cover and fill. Water level should not exceed the
“MAX”
mark in water tank. Then
replace the water tank cover.
Note:
Sirena Espresso Machine comes with a detachable water tank for easy cleaning. Fill water tank with
water first, and then attach water tank into Sirena Espresso Machine.
2.
Set steel mesh into metal funnel (with no coffee grounds in steel mesh), make sure the tube on the funnel
aligns with the groove in Sirena Espresso Machine, then insert the funnel into Sirena Espresso Machine
from the
“INSERT”
position, and fix them into Sirena Espresso Machine firmly by turning the handle
counterclockwise until it is at the
“LOCK”
position.
3.
Place a cup on removable cup shelf. Make sure steam control knob is on the
“0”
position.
4.
Plug in Sirena Espresso Machine. Press the
ON/OFF
button to turn on, power indicator light will be
illuminated red.
5.
Press
ESPRESSO
button, Sirena Espresso Machine will pump water, press
ESPRESSO
button again to
stop pumping water.
6.
Place a cup under the froth nozzle, press
FROTH
button, all the indicator lights will be extinguished.
When Sirena Espresso Machine is done preheating, the froth indicator light will illuminate. Turn the steam
control knob counterclockwise slowly until steam begins to flow out.
7.
Pour out water in each container and then clean them thoroughly, now Sirena Espresso Machine is ready to
make coffee.
Note:
There may be noise when pumping water for the first time, this is normal as Sirena
Espresso Machine is releasing the air inside. After about 20 seconds, the noise will disappear.
