4
Pairing the SirenSat Offshore
The SirenSat Offshore system must be paired to the Siren Marine device app prior to installation.
The base of the SirenSat Offshore will have a barcode with serial number that is required to pair the system.
Follow these steps to pair the SirenSat Offshore:
1.
Login to your Siren Marine
device app
2.
Select Settings > Add
SirenSat device
3.
Select OK or Allow to permit
camera access if prompted
4.
The screen will display an
orange frame with the camera
as shown. Hover the frame
over the SirenSat Offshore
barcode located at the base
of the unit as shown.
5.
Select Add when prompted.
6.
A window will display reading
“Successfully added your
SirenSat Device” will display
on your screen. Select OK.
A new icon indicating the
SirenSat Offshore signal
strength will now appear at
the top of the screen
adjacent to Cell and GPS.
The bar strength will turn
green once the SirenSat
Offshore is toggled ON and
satellite signal is accessible
(see Page 6).
The SirenSat Offshore
battery icon will appear on
your home screen. This will
be listed as the Sat Battery
tile to display its battery
information.