SIRCHIE FX10A Скачать руководство пользователя страница 1

Страница: 1 / 12

TI03-328ENG-REV5

100 HUNTER PLACE, YOUNGSVILLE, NC 27596 USA

Ph: (919) 554-2244, (800) 356-7311 • Fax: (919) 554-2266, (800) 899-8181 • Web: www.sirchie.com • Email: [email protected]

1 of 12

2011 by

SIRCHIE

Products • Vehicles • Training

TECHNICAL INFORMATION

Forensic Video-Based Optical Comparators

Catalog Nos. FX10A, FX10AC

Upon initial receipt of the instrument, inspect for any visible damage. If the shipping carton(s) is damaged,

please point this out to the delivering carrier. If, after opening the carton(s), any damage is apparent, save

all packing material and contact Customer Service at 1-800-356-7311 immediately.

INTRODUCTION

The new FX10 Series of Forensic Video-Based Optical Comparators have

been engineered to accommodate high-resolution video cameras matched to

superior optics and have newly developed internal

digital circuitry coupled to an eye-level control pan-

el. The FX10AC model features color video camera,

while the FX10A model has a black and white cam-

era and video monitor. These units will directly feed

video monitors, recorders or computers equipped

with video capture capability. Not just a fingerprint

projector, these instruments permit examination

Содержание FX10A












