12.2
Video Tampering
Events > Video Tampering
What this tab is for
On the Video Tampering tab, you can configure the camera to raise an alarm when the lens is
covered and to link specific response actions to such an event.
Steps
Video Tampering configuration involves the following steps:
1
On the Area Settings tab, you define the area to be monitored.
2
On the Arming Schedule tab, you define the period(s) when you want the function to be
active.
3
On the Linkage Method tab, you define the action(s) to be taken when an event occurs.
To set the video tampering detection area
1
Select Enable.
2
On the Area Settings tab, click Draw Area.
3
Drag your mouse pointer across the Live View window to draw a detection area.
4
(Optional) Drag the sizing handles to resize the area.
5
(Optional) Drag the area to position it correctly.
6
Click Stop Drawing to finish the drawing of one area.
7
(Optional) Click Clear All to delete all areas.
8
(Optional) Drag the slider to set the sensitivity of the detection.
9
Click Save.
To set the arming schedule
1
On the Arming Schedule tab, drag your mouse pointer across the required day(s) to set
the arming schedule.
A Copy button appears as you move your pointer across the schedule. You can click it to
copy the settings of a specific day to another day.
Events
72
