２．
Purchase/Settings in Web Portal
＜
SIP Trunk 2 Detailed Settings
・
Password Authentication
＞
①
②
③
④
⑤
⑤
⑥
⑦
⑧
⑨
① Login server name of SIP Trunk 2
② SIP Server IP Address
⑩
② SIP Server IP Address
Please configure it as [peer] in sip.conf on your Asterisk.
*Please refer
p.14
for details.
③ Unique is used as client user ID of your user PBX end.
④ Item “Name” is where you can name/rename your SIP Trunk account.
⑤ Select authentication method as “Password Authentication”
⑤ Select authentication method as “Password Authentication”
⑥ Enter your terminal password is used as client user password of your PBX end.
⑦ In case you use Free Call or Navi-Dial number, please designate format of
incoming number configured on your SIP server.
Checked : Please configure 0ABJ number
Unchecked : Please configure Free Call or Navi-Dial number.
(* Changing check box status is not allowed.)
(* Changing check box status is not allowed.)
⑧ Set multiple call count. It’s 1 by default. Purchase “Additional 1 channel for
SIP Trunk 2” if you need more than 2 concurrent calls.
⑨ If this option is checked, you can specify channel reservation for multiple
outbound calls.
⑩ If this option is checked, you can specify channel reservation for multiple
inbound calls.
9
inbound calls.
*Note ⑨ and ⑩
The total channel reservation (ou inbound) must not exceed the multiple call count.
Please refer p.12 for further details.
