22
Notes:
7
ELECTRICAL CONNECTION
Warning:
Never connect live or neutral wires to the earth terminal of
the plug. Only fit an approved plug with the correct rated fuse. If in
doubt consult a qualified electrician.
This heater is
supplied
with a
charger fitted with a
standard UK type 230v ~ plug.
Before using the
charger
in-spect the cable and plug to ensure that neither are
damaged. If any damage is visible have the heater inspected / repaired by a suitably
qualified person. If it is necessary to replace the plug a heavy duty impact resistant
plug would be preferable.
The wires for the plug are coloured in the following way:
Earth
Neutral
Yellow /
Green
Blue
Brown
Live
As the colours of the wires may not correspond with the markings in your
plug, proceed as follows: The wire which is coloured blue, must be connected
to the terminal marked with N or coloured black. The wire which is coloured brown,
must be connected to the terminal, which is marked L or coloured red. The wire
which is coloured yellow / green should be connected to the terminal which is
coloured the same or marked.
Always secure the wires in the plug terminal carefully and
tightly. Secure the cable in the cord grip carefully.
Cord Grip
WARNING!
It is the responsibility of the owner and the operator to read,
understand and comply with the following:
You must check all electrical products, before use, to ensure that they are safe.
You must inspect power cables, plugs, sockets and any other connectors for wear or
damage.
You must ensure that the risk of electric shock is
minimized
by the installation of
appropriate safety devices; A residual current circuit Breaker (RCCB) should be
incorporated in the main distribution board. We also recommend that a residual
current Device (RCD) is used. It is particularly important to use an RCD with portable
products that are plugged into a supply which is not protected by an RCCB. If in
any doubt consult a qualified electrician.
