12
Before cleaning or maintenance operations always run the heater for a short while in
fan mode to allow it to cool.
Turn the heater off and remove the plug from the mains supply.
Clean the heater with a soft dry cloth only.
DO NOT
use abrasives or solvents.
Periodically check the heater grill to ensure that it is not blocked.
MAINTENANCE INSTRUCTIONS
Note:
Dry compressed air could be used to blow away any dust etc. that
may build up inside the turbofan 2000.
Caution:
Whilst using compressed air, dust and / or other particles may become air borne;
carry out the operation in a well ventilated area and use the appropriate eye and ear pro-
tection and a dust mask.
No other maintenance is necessary.
DO NOT
dismantle or tamper with the heater, as this may be dangerous and will invali-
date the warranty.
If a problem with the heater is experienced, or if the mains lead or plug become
damaged, contact your distributor for repair.
When you store the heater, let it cool down, ensure that it is dry, cover with a plastic
bag, put in a packing box and store it in a dry, ventilated place.
9
Top - 500 mm
Minimum Clearance Around
Heater
Sides - 500 mm
Rear - 750 mm
Front - 1800 mm
TECHNICAL SPECIFICATIONS
Part Number
09128
Input Voltage
230v ~ 50Hz
Power (Max.)
2000 Watts
Fuse Rating
13 Amps
Settings - Fan
25 watts
Settings - Heat 1
1000 watts
Settings - Heat 2
2000 Watts
Protection
IP20
Heater Dimensions
225 x 220 x 160 mm
Net Weight
1.7 Kg
