SIP 08976 Скачать руководство пользователя страница 8

GENERAL INFORMATION

• 

This appliance’s performance and 

userfriendliness make it suitable for 

PROFESSIONAL use.

•  The appliance can be used for washing surfaces 

outdoors, whenever pressurised water is 

required to remove dirt.

•  With special optional accessories, it can be 

used for foaming and sandingblasting, and for 

washing with a rotary brush for application to 

the gun.

>    THECNICAL DATA

 (see thecnical data plate) 

SYMBOLS

  WARNING: It is important to be 

careful of the following items.

  IMPORTANT

 LOCKED

  OPEN

  IF PRESENT

 Double  insulated (IF PRESENT): 

supplementary insulation is applied 

to the basic insulation to protect 

against electric shock in the event of 

failure of the basic insulation.

SAFETY PRECAUTIONS

>   WARNINGS

• 

01WARNING: This appliance is for outdoor 

use only.

 02WARNING: Always disconnect the 

electricity and water supplies on completion 

of every job.

 03WARNING: Do not use the machine 

if a supply cord or important parts of the 

machine are damaged, e.g. safety devices, 

high pressure hoses, trigger gun.

 04WARNING: This appliance has been 

designed for use with the detergent 

provided or the detergent specified 

by the manufacturer, such as a neutral 

shampoo based on biodegradable anionic 

surface active detergents. The use of 

other detergents or chemicals may put the 

appliance’s safety at risk.

 05a  WARNING: Do not use the machine 

within range of persons unless they wear 

protective clothing.

  05b - Do not allow other people or animals 

within a range of 5m when operating the 

machine. 

  05c - Always wear suitable protective clothing 

in order to protect yourself against ricocheting 

parts. 

  05d - Do not touch the plug and the appliance 

with wet hands or when barefoot. 

  05e - Wear safety goggles and non-slip rubber 

footwear.

 06WARNING: Do not direct the nozzle 

toward mechanical parts containing 

lubricant grease, as the grease will dissolve 

and spread over the surrounding ground. 

Vehicle tyres/tyre valves may only be 

cleaned from a minimum distance of 30 cm, 

otherwise the vehicle tyre/tyre valve could 

be damaged by the high-pressure jet. The 

first indication of this is a discoloration of the 

tyre. Damaged vehicle tyres/tyre valves can 

be deadly dangerous.

 

07WARNING: High pressure 

jets can be dangerous if subject 

to misuse. The jet must not be 

directed at persons,animal, live electrical 

equipment or the machine itself.

 08WARNING: High pressure hoses, fittings 

and couplings are important for the safety 

of the machine. Use only hoses, fittings 

and couplings recommended by the 

manufacturer. (it is extremely important 

to protect these components against 

damage by avoiding their improper use and 

protecting them against bending, knocks 

and scratches).

 09WARNING: Appliances not equipped 

with A.S.S. – Automatic Stop System: must 

not be left in operation for more than 2 

minutes with the gun released. The recycled 

water heats up considerably, seriously 

Translation of the original instructions

EN

8

Содержание 08976

















Отзывы: