12
OPERATING INSTRUCTIONS….cont
Tab
Cut Out
Collection Bag
Hose Connector
Connect the extension pipes to the hose (if required).
Connect either the brush or crevice tool to the extension pipe (if required).
Press the (I) button to start the vacuum cleaner.
Press the (0) button to stop the vacuum cleaner.
Line up the tab on the hose with the cut
out on the hose connector, push the hose
into the hose connector and turn clock-
wise to lock into position.
Push the collection bag over the back of the hose connector (see below).
Refit the motor housing and secure both clamps.
Note:
Do not overtighten the hose to avoid turning it past the locked position.
Note:
When wet vacuuming; the machine can only collect water, it will not
recirculate the water to clean carpets or similar. It is only for use with water and
not chemicals or other substances that could damage the internal seals etc.
WET VACUUMING
9
Note:
If any of the above are missing or damaged, contact your distributor
immediately.
CONTENTS & ACCESSORIES
Vacuum Cleaner
1.5mtr Hose
Extension Pipe (x2)
Castor (x4)
Attachment Holder (x4)
Attachment Holder Screw (x4)
Collection Bag
Brush
Crevice Tool
Foam Filter
TECHNICAL SPECIFICATIONS
SIP Code
07907
Description
Sip Vacuum Cleaner 1400/20 Wet & Dry
Input Voltage
230V ~ 50hz
Power
1400 W
Airflow
58 l/s
Hose Length
1.5 Metres
Container Capacity
20 Litres
Water Capacity
(Approx.)
12 Litres
