SIP 06434, Инструкция по эксплуатации и техническому обслуживанию

Страница: 3 / 21

3
2 Introduction
This device generates alternating current of high frequency. The current passing through a heating
coil creates an alternating magnetic field which by using the principle of electromagnetic induction
vibrates electrons inside the heated material. The energy of moving electrons is dissipated as heat,
which heats the metal in the work field of the instrument. The more easily magnetized the material,
the more heat it creates. That is why the device heats easily nonferrous metals and their alloys, but
has no effect on glass, plastics, wood, textiles and other non-conductive materials.
3 Technical data
Name (type) 06434
Input voltage ~230V, 50/60Hz
Input current max. 7.5A
Power max. 1.75kW
PF 0.99
Load factor 50%@1.5kVA a 100%@1.0kVA
Cover IP20
Weight 4.5kg / 9,921lb
Dimensions 200 x 140 x 75mm
4 Safety instructions
4.1 General safety rules
Read carefully all instructions in the manual. Failure to follow these instructions may
result in electric shock or burns, fire and / or serious personal injury.
The user is Users are responsible for installing and using the system in accordance with the
instructions provided in this manual. The contractor shall not be liable for damages resulting from
improper use and handling.
The device may be operated only by persons properly trained and appropriately qualified. Do not
operate 06434 under the influence of drugs, alcohol or medication
Bystanders and animals should be kept safely away when operating with the device, even when
cooling the heated material.
Avoid working in the rain, water and moist environments. Keep work area well ventilated and dry,
clean and well lit.
When working with the 06434 always have a fully functional fire extinguisher within reach.