10
ASSEMBLY INSTRUCTIONS
Connect the leg (1) to either the left or right post by using the bolts (2), washers (6),
spring washers (5) and nuts (4), do not tighten fully just yet.
Connect both leg supports (3) to the post and leg, by using bolts, washers, spring
washers and nuts.
Repeat the process for the opposite post.
Ensure everything is level, then proceed to tighten all the bolts/nuts.
FITTING THE LEGS
FITTING THE GAUGE
Caution:
Due to the weight of the shop press; Correct lifting equipment
should be used during assembly.
Fit the nylon seal (72) into gauge fitting (51), then fit the pressure gauge (50) to
the fitting and tighten fully.
Nylon Seal
Gauge Fitting
Gauge Fitting
Gauge
19
PARTS LIST - MAIN….cont
Ref. No.
Description
Ref. No.
Description
59.
air inlet hose
68.
handle grip
60.
plug
69.
steel cable
61.
air valve
70.
steel cable
62.
wire protect cover
71.
connector
63.
steel ball
72.
Nylon Seal
64.
handle
73.
screw
65.
air inlet hose
74.
connector
66.
bolt
75.
air hose connector
67.
flat washer
76.
spring