SIP 03692, Руководство пользователя, Страница: 7 / 12

7
OPERATION
Raise a Load Squarely.
Attach the leveller to the load via the recommended lifting points .
I f this is an engine, ensuring that all necessary components are disconnected, i.e.
exhaust, gearbox, cable s , electrical connections etc.
V ery slowly take the weight of the engine .
As the load begins to lift it may rise unevenly at one end only.
Turn the crank handle of the Leveller so that the load moves AWAY from that end.
Continue to raise the load a little at a time whilst moving the load away from the
raised end until the load rises squarely.
If there is a degree of twist, this may be taken up by adjusting the chain and shackle
arrangement to lengthen or shorten the hooks as appropriate .
ALWAYS ensure that the FULL thickness of the bolt is in contact with the threaded end
of the shackle .
If this method is insufficient to compensate for the degree of twist, you should adjust
the chain length on one or more of the lifting points.
Raising a Load at an Angle
In some cases, it may be necessary to raise the load at an angle.
Adjust the chains and shackles appropriately, and select the correct hole in the sliding
bar .
Gently raise the load,turning the crank handle as required to achieve the required
degree of tilt.