8
TECHNICAL SPECIFICATIONS - 03685
Capacity (Max.)
1 Ton
Position A
1080mm
Lift Position Capacities
¼, ½, ¾ & 1 Ton
Position B
990mm
Oil Type
ISO 15
Position C
900mm
Oil Capacity
(approximately)
0.7 Litre
Position D
810mm
695mm
85
0m
m
72
0m
m
1450mm
1610mm
18
10
m
m
18
90
m
m
20
50
m
m
19
70
m
m
A
D
C
B
¾T Max
1T Max
½
T Max
¼T Max
500mm
17
MAINTENANCE….cont
Step 1:
Lower the hydraulic ram so its at its lowest position (turn the release valve anti-
clockwise).
Step 2:
Remove the oil fill bung fully from the hydraulic ram.
Step 3:
Check the oil level and top up if required. The oil level should be just below the
oil fill hole.
Step 4:
Refit the oil fill bung.
Step 1:
Remove the hydraulic ram from the crane.
Step 2:
Make sure the hydraulic ram is at its lowest position (turn the release valve anti-
clockwise).
Step 3:
Remove the oil fill bung fully from the hydraulic ram.
Step 4:
Lay the hydraulic ram on its side and drain the oil into a suitable container.
Step 5:
Return the hydraulic ram to an upright position.
Step 6:
Fill with hydraulic oil until the oil starts to seep out of the oil fill hole.
Step 7:
Wipe away any excess oil.
Step 8:
Refit the oil fill bung and refit back onto the engine crane.
A periodic coating of light lubricating oil to pivot points, axles and hinges will help to
prevent rust and assure that the castors and hydraulic ram move freely.
Recommended Oil
-
ISO 15.
Oil Capacity
(approximately)
-
03685
700ml,
03687
1407ml.
Note:
Do not pump the hydraulic ram handle when filling with oil.
Note:
Contact your local authority on how / where to dispose of the waste
oil.
ADDING OIL
OIL CHANGE
LUBRICATION
Note:
For the best performance and longest life, completely change the
oil at least once per year; Always dispose of hydraulic oil in accordance
with local regulations.
