SIP 03683, Руководство пользователя, Страница: 5 / 16

5
SAFETY INSTRUCTIONS ...cont
DANGER! Check that the product is in sound condition and good working order; Take
immediate action to repair or replace damaged parts.
WARNING! Only operate on a level and stable surface and never use on soft ground
where the product is likely to “sink” whilst in operation.
NEVER STAND ON THE PRODUCT: The product is not designed for this purpose.
DO NOT dismantle or tamper with the product, as this may be dangerous and will
invalidate the warranty.
If a problem with the bender is experienced or suspected stop using the product
immediately and contact your distributor for repair.
Do not attempt to press a load that exceeds the rated capacity of the product.
Regularly inspect, clean and lubricate the shop product, ensuring that it is in
good working order and condition.
Always ensure that the work area is clean and tidy, free from unrelated materials and
has adequate lighting.
Keep hands, limbs etc. clear of moving parts during operation of the ram.
DO NOT top-up the bender with brake fluid, or other oil types; use hydraulic oil
only.
DO NOT adjust the safety overload valves.
Clean the product correctly, with the ram in the down position, but DO NOT leave it
extended.
Failure to follow the warnings in this manual, may result in personal injury and/
or property damage.
Prior to applying the load, be sure that the hydraulic ram nut threads are fully en-
gaged to the head assembly.
Components of this shop press are specially designed to withstand the rated capac-
ity. Do not substitute bolts, pins, or any other components.
Always press the load on the centre of the ram. Offset loads can damage the ram,
and may cause a workpiece to eject.
Before operating, check for signs of cracked welds, bent support pins , loose or
missing bolts, or any other structural damage. Do not operate if any of these
conditions exist. Have repairs made only by an authorised service centre / engineer.
Parts being pressed may splinter, shatter or eject from the bender. Due to various
applications, it is your responsibility to always use adequate guards, such as eye
protection and heavy protective clothing, when operating this .
Do not stand in front of work area where the load is applied.