8
TECHNICAL SPECIFICATIONS
Part number
01929
Input voltage
230V ~ 50Hz
Power
1100 W
Air Flow (max.)
3.05 m³/Min
Inlet Hose Ø
100 mm
Fan Speed
20000 rpm
Inlet Hose Length
2 Metres
Collection Capacity
50 Litres
Packaged Dimensions (HxWxD)
715 x 445 x 415 mm
Net Weight
10.35 Kg
9
This dust collector is fitted with a standard UK 13A type 230V ~ plug. Before using the
dust collector inspect the cable and plug to ensure that neither are damaged. If any
damage is visible have it inspected / repaired by a suitably qualified person. If it is
necessary to replace the plug a heavy duty impact resistant plug would be prefera-
ble.
The wires for the plug are coloured in the following way:
Yellow / green
Earth
Blue
Neutral
Brown
Live
As the colours of the wires may not correspond with the markings in your plug, pro-
ceed as follows: The wire which is coloured blue, must be connected to the terminal
marked with N or coloured black. The wire which is coloured brown, must be connect-
ed to the terminal, which is marked L or coloured red. The wire which is coloured yel-
low / green should be connected to the terminal which is col-
oured the same or marked.
Note:
Always make sure the mains supply is of the correct voltage and the
correct fuse protection is used. In the event of replacing the fuse always
replace the fuse with the same value as the original.
Warning:
Never connect live or neutral wires to the earth terminal of the
plug. Only fit an approved plug with the correct rated fuse. If in doubt
consult a qualified electrician.
Note:
If an extension lead is required in order to reach the mains supply;
ensure that this too is rated for the correct voltage and fuse rating.
Note:
The cross section of the extension lead should be checked so that it
is of sufficient size so as to reduce the chances of voltage drops.
ELECTRICAL CONNECTION
Always secure the wires in the plug terminal carefully and tightly.
Secure the cable in the cord grip carefully.
Cord Grip
