6
SAFETY INSTRUCTIONS….cont
KEEP ALL GUARDS IN PLACE:
And in full working order.
MAINTAIN THE ABRASIVE CUT OFF SAW WITH CARE:
Keep discs clean for the best and
safest performance.
All
extension cables must be checked at regular intervals and replaced if damaged.
ALWAYS:
Keep the vice handle knob on the abrasive cut off saw clean, dry and free
of oil and grease.
USE ONLY RECOMMENDED ACCESSORIES:
Consult this user manual, your distributor or
SIP directly for recommended accessories. Follow the instructions that accompany
the accessories. The use of improper accessories may cause hazards and will invali-
date any warranty you may have.
REMOVE ADJUSTING KEYS AND WRENCHES:
Form a habit of checking to see that keys
and adjusting wrenches are removed from the abrasive cut off saw before every use.
SECURE THE WORKPIECE:
Always use the vice to hold the workpiece. This frees up both
hands to operate the abrasive saw.
DO NOT OVERREACH:
Keep proper footing and balance at all times.
USE THE RIGHT TOOL:
Do not use the abrasive cut off saw to do a job for which it was
not designed.
DO NOT FORCE THE ABRASIVE CUT OFF SAW:
It will do the job better and more safely
at the rate which it was designed.
DO NOT OPERATE THE ABRASIVE CUT OFF SAW IN EXPLOSIVE ATMOSPHERES:
Do not
use the abrasive cut off saw in the presence of flammable liquids, gases, dust or other
combustible sources. Abrasive sawing operations may create sparks which can ignite
the dust or fumes.
DO NOT EXPOSE THE ABRASIVE CUT OFF SAW TO RAIN OR USE IT IN WET CONDITIONS:
Water entering the abrasive cut off saw will greatly increase the risk of electric shock.
HAVE YOUR ABRASIVE CUT OFF SAW REPAIRED BY A QUALIFIED PERSON:
The tool is in
accordance with the relevant safety requirements. Repairs should only be carried out
by qualified persons using original spare parts, otherwise this may result in considera-
ble danger to the user.
DO NOT
dismantle, tamper with or use the abrasive cut off saw without all guards fit-
ted as this may be dangerous and will invalidate the warranty.
Keep hands out of the path of the abrasive disc, never reach around the abra-
sive disc.
Make sure the abrasive disc is clear of the workpiece before the trigger switch is
pressed in.
Stop operation immediately if you notice anything abnormal.
Wait for the abrasive disc to stop completely and remove the plug from the
mains supply before servicing or adjusting the abrasive cut off saw or changing
the abrasive disc.
Be alert at all times, especially during repetitive, monotonous operations. Don't
be lulled into a false sense of security. Abrasive discs can be extremely unforgiv-
ing.
19
PARTS LIST - 01315
Ref. No.
Description
SIP Part No.
Ref. No.
Description
SIP Part No.
1.
Lock Bolt
WK08-00001
31.
Clamp Nut
WK08-00031
2.
Screw
WK08-00002
32.
Screw
WK08-00032
3.
Washer
WK08-00003
33.
Spring Washer
WK08-00033
4.
Locking Handle
WK08-00004
34.
Roll Pin
WK08-00034
5.
Rubber Foot
WK08-00005
35.
Split Pin
WK08-00035
6.
Base
WK08-00006
36.
Washer
WK08-00036
7.
Fixed Clamp Jaw
WK08-00007
37.
Screw
WK08-00037
8.
Washer
WK08-00008
38.
Motor Cover
WK08-00038
9.
Lock Washer
WK08-00009
39.
Brush Spring
WK08-00039
10.
Bolt
WK08-00010
40.
Brush Set
WK08-00040
11.
Spark Deflector
WK08-00011
41.
Screw
WK08-00041
12.
Bolt
WK08-00012
42.
Brush Holder
WK08-00042
13.
Pivot Shaft
WK08-00013
43.
Screw
WK08-00043
14.
Lock Pin
WK08-00014
44.
Housing
WK08-00044
15.
Ring
WK08-00015
45.
Rubber Cover
WK08-00045
16.
Lock Pin Cap
WK08-00016
46.
608 Bearing
WK08-00046
17.
Screw
WK08-00017
47.
Stator
WK08-00047
19.
Nut
WK08-00019
48.
Fan Baffle
WK08-00048
20.
Washer
WK08-00020
49.
Screw
WK08-00049
21.
Lock Nut
WK08-00021
50.
Armature
WK08-00050
22.
Torsion Spring
WK08-00022
51.
Screw
WK08-00051
23.
Nut
WK08-00023
52.
Spring Washer
WK08-00052
24.
Small Lead Screw
WK08-00024
53.
Bearing Cap
WK08-00053
25.
Thread Pin
WK08-00025
54.
Flange Lock Pin
WK08-00054
26.
Clamp Jaw
WK08-00026
55.
Bearing
WK08-00055
27.
Washer
WK08-00027
56.
Spring
WK08-00056
28.
Spring Washer
WK08-00028
58.
Arm
WK08-00058
29.
Nut
WK08-00029
59.
Bearing
WK08-00059
30.
Clamp Base
WK08-00030
60.
Gear
WK08-00060
