Sioux Tools HiQual S202535BRN, Быстрый старт

Страница: 13 / 13

13
Quality Check Sheet - Short Chute Serial Number:
Circle one -
Auto LH/RH Manual Less Head gate
Assembler(s)
Initials Quality
Initials
1
All 4 door latches engage with a minimum of 1/8" past flange:
(See Figure 1)
2 Squeeze chute opens & closes smoothly:
3
Check open measurement to a minimum of 28"
(See Figure 3)
4
Check closed measurement to maximum of 15" on chute:
(See Figure 4)
5
Check collar on Ratchet Lock Assembly is flush with outside of frame:
(See Figure 8-S191398)
6 Check all double flap handles (S191382) ability to open & close:
7
Check zerk installation and grease entire chute: Total of 34 zerks:
(See Figure 9)
8
Check the function of the advancement bar plates on both sides:
(See Figure 10)
9
Check to make sure all decals and serial #'s are applied:
(See attached decal placement sheet)
10
Verify hole is drilled all the way through:
(See Figure 13)
11
Verify that brisket bars are in correctly:
(See Figure 14)
12
Make sure that blinders are on straight and all self-taping screws are
tight: (See Figure 15)
13 Make sure all nuts are securely fastened:
14
Verify 1/16in Rubber on end of squeeze does not pinch and installed
correctly (See Figure 17)
15 Attach Operator's Manual and quality check sheet to the chute3:
Date:
Assembler Name: Signature:
Quality Name: Signature: