Sionyx OPSIN DNVM1 Скачать руководство пользователя страница 54

Страница: 54 / 61

S I O N Y X O P S I N U S E R M A N U A L

FCC RADIATION EXPOSURE STATEMENT:

This equipment complies with FCC radiation exposure limits set forth for

an uncontrolled environment. End users must follow the specific operating

instructions for satisfying RF exposure compliance. This transmitter must not be

co-located or operating in conjunction with any other antenna or transmitter.

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and the receiver.

The provided power cables must be used with this unit to ensure compliance

with the class B FCC limits.

IC REGULATIONS

This device complies with Industry Canada license-exempt RSS standards.

Operation is subject to the following two conditions: (1) This device may not

cause interference and; (2) This device must accept any interference–including

interference that may cause undesired operation of the device. This Class B

digital apparatus complies with Canadian ICES-003.

RF EXPOSURE WARNING

The equipment complies with RF exposure limits set forth for an uncontrolled

environment. The antenna(s) used for this transmitter must not be co-located or

operating in conjunction with any other antenna or transmitter.

Содержание OPSIN DNVM1






























































Результаты поиска

Содержание OPSIN DNVM1

Отзывы:

Похожие инструкции для OPSIN DNVM1

Бренды по названию

Популярные бренды

Sionyx OPSIN DNVM1, Руководство пользователя

Результаты поиска

Содержание OPSIN DNVM1

Отзывы:

Похожие инструкции для OPSIN DNVM1

Бренды по названию

Популярные бренды