Sinus Jevi WD-H, Руководство пользователя

Страница: 5 / 8

GB
Sinus Jevi Electric Heating B.V.
Aambeeld 19
1671 NT Medemblik
The Netherlands
Tel. +31 (0)227-549 100
INSTALLATIoN, oPERATIoN AND
mAINTENANCE INSTRUCTIoNS
TYPE WD-H / WD-L RVS
FINNED TUBE HEATER - WD-H / WD-L RVS
Page 5 of 8
Length
(A)
Mounting
(B)
WD-H RVS 500 500 mm 365 mm
WD-H RVS 1000 700 mm 565 mm
WD-H RVS 1500 900 mm 765 mm
WD-H RVS 2000 1100 mm 965 mm
WD-H RVS 3000 1500 mm 1365 mm
Length
(A)
Mounting
(B)
WD-L RVS 400 1100 mm 965 mm
WD-L RVS 600 1500 mm 1365 mm
WD-L RVS 800 1900 mm 1765 mm
WD-L RVS 1000 2300 mm 2165 mm
WD-L RVS 1200 2700 mm 2565 mm
start-up
As soon as the main voltage is switched on the heaters WD-H RVS, WD-L RVS are in operation.
B
A
118
115
66
184
145
Ø7
WD-H RVS/WD-L RVS with built-in thermostat
Heaters WD-H/WD-L RVS with built-in thermostat, heat according to the pre-set
temperature. This temperature can be steplessly adjusted using the thermostat knob.
The operating status of the heater is indicated by the signal light.
• = frost free
= +5°C to +30°C
WD-H RVS/WD-L RVS with inbuilt switch
Heater WD-H/WD-L RVS with inbuilt switch, heat according to the preset heating power.
Using the switch knob the power can be adjusted in 3 steps.
level 1: 1/3 power
level 2: 2/3 power
level 3: full power
Surface temperatures
The effective temperature rises at the ribbed top edge of the ribbed tube heaters during operation:
WD-H RVS: ca. 200°C, WD-L RVS: approx. 67°C
The effective temperature rises at the ribbed top edge of the tube heater during operation: WD-H RVS approx. 225°C
The surface temperature is made up of the effective temperature rise and room temperature.
Care must be taken to ensure that the heaters are not covered. If covered there is a fire hazard.
Warranty
A 1 year warranty is provided on all functional parts.